This is a latest methodology developed of flooring in sunken slab(Toilet). In this system "groove cut drain" of 2" wide is to made all around 6" away from wall; direction of slope towards the "groove cut drain, so that if water reaches to the flooring that will rolled down to the groove cut drain.Through drain, water will go to the escape pipe and flow out.
Below given image shows how above drawing is implemented in real scenario.Groove cut all around will be filled with sand so that it will not be chocked with something else. This drain end at point where escape pipe is to give. Waterproof coating should be done inside the drain
Finish the surface with cement slurry
Than,Sanitary fittings are to be done.
This groove cut system actually prevents water to be jammed within sanitary pipes.
This detailed explanation of flooring methods in sunken-slab toilets is really helpful—proper flooring and slope make a big difference for drainage and long-term maintenance. But with moisture and water flow involved, waterproofing becomes equally important. At Wet2Dry Solutions, our bathroom waterproofing bangalore services ensure that even in complex floor structures, bathrooms stay dry, leak-free, and durable. Thanks for this informative guide!
ReplyDeleteThis was a very informative post on flooring techniques in sunken slabs. You explained the method and precautions clearly. At LeakFoe, we use durable epoxy waterproofing systems to seal wet areas and prevent long-term seepage. Thanks for sharing such valuable insights!
ReplyDelete